Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLING THE EQUIPMENT
CAUTION!
Before starting to assemble your equipment, it is necessary to pay attention to the following precautions:
•Make sure that the packaging is not damaged and that the parts and components of the equipment are
not damaged.
•It is recommended that the equipment be unpacked at the place where it will be assembled.
•The assembly location must be clean.
•The floor must be flat, level, and rigid to avoid equipment instability.
•It is recommended that the equipment be assembled away from humidity and out of sunlight.
ICONS
The icons are meant to instruct good
practices that should be followed
during assembly.
TOOLS
Use the following tools to assemble
the equipment. The function of the
torque table is to guide how much
tightening a particular bolt can
undergo. The table must be followed
strictly.
TABLE FOR THE SPECIFICATION
OF THE TIGHTENING
TORQUE OF BOLTS FOR
ATTACHING STEEL
STRUCTURES
Diameter [mm]
Torque [N.m]
M6
M8
M10
For this assembly it
is recommended that it
be done by two
Fixed wrench
Wrench
9-12
22-29
45-58
13
50%
Do not
tighten the
bolts all the way
people
Medium Torque
Threadlocker
Allen
Grease
spray
100%
Do not
tighten the
bolts all the way
Philips
Elastic
screwdriver
ring pliers
Publicidad
