Digitus DN-16038 Manual De Instrucciones página 7

Camera Connections
®
DIGITUS outdoor Plug&View cameras are equipped with a special
cable.
Check installation option by means of the installation illustration.
 Reset button:
Press and hold this
button for 10 seconds
after the camera is
connected and ready-
to-use. This resets the
camera to default
settings.
 Network cable:
Connect the network
cable to you router on
the network to establish
Internet connection.
 DC 12V power
connection:
Connect the external
power adapter to
supply the camera with
power.
 LED status indicator:
The blue LED status
indicator shows if the
camera is supplied with
power.
For models DN-16039, DN-16043 and DN-16048 power can be
supplied directly to the camera via the network cable in connection
with a PoE injector or PoE switch.
7