Kobalt 19003 Instrucciones De Montaje página 9

ASSEMBLY INSTRUCTIONS
6. Install the bottom shelf (G) by tipping it to
the side and inserting it into the cabinet.
With bottom shelf (G) at an angle, align
the cut-outs on the bottom shelf (G) with
the back seams caused by side panels (C
and D) and back panels (A and B).
Carefully lower the bottom shelf (G),
ensuring the front of the bottom shelf (G)
goes over the front flange of the base
panel (E).
Determine the location for the adjustable
shelf (H). Hold the adjustable shelf (H) at
an angle to make it easier to install.
Please make sure adjustable shelf (H)
snaps into the hooks on the unit.
Note: If the hooks are flatted during
assembly, use a slotted screwdriver (not
included) to recover them.
7. Lift and pull the L-shaped pivot pin on the
edge of the left door (I), aligning the
assembling holes of the base panel (E)
and top panel (F), then release. Repeat
for right door (J).
6
tooltip tooltip tooltip tooltip tooltip tooltip
tooltip
H
C
G
E
7
I
9
C
H
D
E
A
F
J