Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS:
OPERATION INSTRUCTIONS
§ Make sure that the voltage rating on the type plate corresponds to your main voltage of your
installation. If this is not the case, contact the dealer and do not connect the unit.
§ Before plugging in your new Raclette grill, check to see that the electric circuit is not overloaded
with other appliances. This unit should always be operated on a separate 220-240 volt, AC
outlet which is able to supply min.16A
§ Be certain that your unit is resting level on the countertop. Avoid using pans that are unstable
and easily tipped. Place pan under heating element.
§ Turn the switch on 1 position. The pilot light will glow indicating the heating element is
energized and heating will begin immediately
§ The metal surfaces will become hot. Do not touch while is use. When cooking is finished, turn
the thermostat back to « O » position.
§ The surface is hot when using or before cooled. Never touch the appliance before it's cooled
to avoid scald.
§ If the hotplate is not to be in use for a long period of time, it is recommended to unplug unit
from the outlet. This helps to prevent accidental burns.
§ Never leave the unit unattended while in operation.
USING YOUR RACLETTE
§ Plug in the appliance.
§ Put the switch at the position "MIN", the indicator comes on. Pre-heating time is 5 – 8 min for
the grill,
§ Because the surface is very hot, the appliance must be used on a heat-resistant surface. It is
also recommended that the minimal distance between wall or environmentally components
is not shorter than 15cm.
§ It is possible that slight smoke smell comes out when first using.
Publicidad
