HAUNTED LIVING KL-99002 Manual Del Usuario página 3

ASSEMBLY INSTRUCTIONS
1. Place the cross (A) on the base (B), aligning the
bottom recess of the cross with the top
protrustion of the base. The bottom surface of
the cross should rest on the top surface of the
base without a gap.
2.Use the large plastic nut (C) to fasten the cross
to the base. Hand tighten only.
1
A
B
2
C
4
ASSEMBLY INSTRUCTIONS
3. Place the weighted bottom (D) into the base,
aligning the screw holes. Using a Phillips head
screwdriver, assemble the four screws (AA) into
place, securing the weighted bottom.
Hardware Used
AA
M6 x 18 mm Screw x 4
Tools Required
4. OPTIONAL: The weighted base has a 1/2" hole
at the bottom that allows it to be placed over a
stake or post for additional resistance against
tipping.
3
AA
D
4
STAKE NOT INCLUDED
5