2 Safety Information
2.1 Intended Use
Use the product only for weighing in accordance with this User manual.
•
The weigh module is intended for indoor use only.
•
Any other type of use and operation beyond the limits of technical specifications is considered as not
•
intended.
2.2 Definition of Signal Words and Warning Symbols
Safety notes are marked with signal words and warning symbols. These show safety issues and warnings.
Ignoring the safety notes may lead to personal injury, damage to the load cell, malfunctions and false
results.
Signal Words
CAUTION
Attention
Note
Warning Symbols
2.3 Product Specific Safety Notes
Your weigh module meets the state of the art technology and complies with all recognized safety rules,
however, certain hazards can arise.
Do not open the weigh module: It does not contain any parts which can be maintained, repaired or replaced
by the user. If you ever have problems with your weigh module, contact your authorized METTLER TOLEDO
dealer or service representative.
Observe instructions
Always operate and use your weigh module only in accordance with the instructions contained in the
product documentation. The instructions for setting up your weigh module must be strictly observed.
If the weigh module is not used according to the product manuals, protection of the weigh module may
be impaired and METTLER TOLEDO assumes no liability.
Staff safety
Use only METTLER TOLEDO accessories and peripheral devices, these items are designed to work optimally
with your weigh module.
Explosion hazard
It is not permitted to use the weigh module in explosive atmospheres of gases, steam, fog, dust and
flammable dust (hazardous environments).
4
Safety Information
Hazardous situation with low risk, resulting in damage to the device or the property
or in loss of data, or minor or medium injuries if not avoided.
Important information about the product (no symbol)
Useful information about the product (no symbol)
General hazard
Electrical shock
WKC