Publicidad
Idiomas disponibles
Idiomas disponibles
FEATURES
li) On/off switch
O
Large detail sanding base
O Dust canister
I_ Sanding base tip
O Random orbit sanding base
I_ Detail finger attachment
ONE YEAR FULL WARRANTY ON CRAFTSMAN TOOL
If this Craftsman toot fails to give complete satisfaction within one year from date of
3urchase, RETURN IT TO ANY SEARS STORE OR OTHER CRAFTSMAN OUTLET
IN THE UNITED STATES FOR FREE REPLACEMENT.
If this Craftsman tool is used for commercial or rental purposes, this warranty applies
for only 90 days from the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
-4,WARNING:
Read all instructions.
Failure to follow all instructions listed below
may result in electric shock, fire and/or
serious injury. The term "power tool" in all of
the warnings listed below refers to your
mains-operated
(corded) power tool or
battery-operated (cordless) power toot.
SAVE THESE
INSTRUCTIONS
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive
atmospheres,
such as in
the presence of flammable
liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
c) Keep children
and bystanders
away
while operating
a power tool.
Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in any
b)
c)
d)
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric
shock
Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators,
ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
Do not expose power tools to rain
or wet conditions.
Water entering a
power toot wilt increase the risk of
electric shock
Do not abuse the cord. Never use
the cord for carrying,
pulling or
unplugging
the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock. Replace or repair
damaged cords. Make sure your
extension cord is in good condition.
Use only 3-wire extension cords that
have 3-prong grounding-type plugs
Publicidad
