Publicidad
Idiomas disponibles
Idiomas disponibles
Ice production
is slow.
Water is
leaking.
5. MAINTENANCE AND CLEANING
5.1 Automatic cleaning procedure (water tank)
1.
Press 'Ice/Clean' for 5 seconds. The indicator light will flash white.
2.
The product will perform the cleaning procedure for 15 minutes and stop
automatically.
3.
During the cleaning procedure, press 'Ice/Clean' to stop the procedure
immediately.
4.
After the cleaning procedure, remove the lid and ice basket. Rinse the water
tank and secondary water tank well with clean water.
5.
Then place the product on the edge of the countertop near the sink. Make sure
the product is stable.
6.
Remove the drain cap at the bottom of the product, as shown in the image. The
dirty water will drain into the sink.
7.
Replace the drain cap when the water tank is completely empty.
Note
◊ Before the cleaning procedure, check that the drain cap is inserted into the
product. If it is not, the cleaning program will not work correctly.
◊ Change the water in the water tank every 24 hours to ensure reasonable hygiene.
◊ When the product is not in use, drain all the water and dry the water reservoir.
The air outlet is
blocked.
The water temperature
in the product is too
high.
There is a malfunction
in the cooling system.
The drain cap is not in
place.
The water line is
loose.
The seal is defective.
Make sure there is at least 15 cm space
between the outlet and surrounding
objects.
Make sure the water temperature is
between 7 and 32°C.
Have this checked by a qualified
technician.
Make sure that the drain cap is placed
correctly.
Have this checked by a qualified
technician.
Have this checked by a qualified
technician.
English
33
Publicidad
