Roadstar HRA-1220 Manual De Instrucciones página 3

WARNINGS
The exclamation point within the triangle is a warning sign alert-
ing the user of important instructions accompanying the
product.
The lightening flash with arrowhead symbol within the triangle
is a warning sign alerting the user of "dangerous voltage" inside
the unit.
To reduce the risk of electric shock, do not remove the cover. No
CAUTION
user serviceable parts inside the unit. Refer all servicing to
RISK OF ELECTRIC
SHOCK
qualified personnel.
DO NOT OPEN
230v~
This unit operates on 230V ~ 50Hz. If the unit is not used for a
long period of time, remove the plug from the AC mains.
This unit must not be exposed to moisture or rain.
The power switch in this unit is mounted on the secondary
circuit and does not disconnect the whole unit from the mains in
OFF position.
Ensure all connections are properly made before operating the
unit.
This unit should be positioned so that it is properly ventilated.
Avoid placing it, for example, close to curtains, on the carpet or in
a built-in installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
English 1 2 English
HRA-1220
AC/DC Home AM/FM Radio with USB Port and MMC/SD Card slot.
INSTRUCTION MANUAL
Please read this instruction manual carefully and familiarize yourself with your new Home
Radio before using it for the first time. Please retain this manual for future reference.
LOCATION OF CONTROLS
1. Speaker
2. Function selector (
USB-SD/FM/AM)
3. Dial scale
4. Telescopic antenna
5. Ventilation hole
6. AC cable
7. TUNING Knob
8. VOLUME - ON/OFF Control
9. SD / MMC Card Slot
10. USB Port
11. PLAY / PAUSE Button
12. Next Trrack Button
13. Previous Track Button
14. Preset equalizer (ONLX FOR USB / SD / MMC)
15. Battery Compartment
CONNECTING TO POWER
Before switching on make sure that the voltage of your electricity supply is the same as
that indicated on the rating plate.
For your own safety read the following instructions carefully before attempting to connect
this unit to the mains.
MAINS (AC) OPERATION
This unit is designed to operate on AC 230V 50Hz current or internal battery. Connecting
it to other power sources may damage the unit.