Publicidad
TruSens N-300 Humidifier Quick Start Guide
7.6 x 7.6 inches (19.3 cm)
TrOSens™
N-300
WELCOME TO COMFORTABLE INDOOR AIR.
Control your air and achieve your optimal humidity
with TruSens. Real-time feedback from a remote
SensorPod™ helps your humidifier monitor and
adjust to your ideal moisture levels.
WARNING
Before operation, follow these steps and read our TruSens Owner's Manual at www.trusens.com/support/owners-manuals.
Included in your box
l
Humidifier+ Power Cord
l
Sensor Pod + 2 AAA Batteries
l
Water Filter
l
Absorbent Aromatherapy Pad
@
~
~
l
Water Tank
SL
(2.l
gal)
Base
Humidifier Controls
Battery Chamber
(underneath)
©2021 ACCO Brands. All rights reserved. TruSens™, U Design'",
SensorPod'" and PureDirect™ are trademarks of ACCO Brands.
Directions for use
A
WARNING
Always unplug the humidifier before removing the water tank. Empty all water before
cleaning water tank, replacing filter or moving the humidifier. Only place the water tank on a
hard, solid surface; do not place on carpeting.
l) Prepare the water filter
Remove plastic bag from filter.
For optimal performance, submerge
filter in bowl of water for
l
hour.
2) Install the water filter
a) Unscrew gray cap. b) Secure the filter onto gray cap. c) Tightly secure gray
cap with filter onto water tank until indicator meets lock symbol. Return water
tank on top of base.
b)
3) Fill the water tank
Remove water tank lid and fill with room
temperature water (preferably distilled)
with pitcher.
A
A
WARNING
Do not pour water into the mist outlet.
CAUTION:
Heavy object. To avoid injury always
fill tank from the top and use care when lifting.
Water Level
Indicator Window
4) Set up
Place humidifier on a dry, firm, flat surface that is free from obstructions.
Do not place humidifier on carpeting or wooden floors; waterproof
mats are recommended.
Open lid of battery chamber found on SensorPod (bottom) and insert
2 AAA batteries (provided).*
SensorPod will automatically begin monitoring if humidifier is on.
For optimal results, place SensorPod on a tabletop or counter across the
room, within line of sight of the humidifier.
Control the humidifier with the touch buttons on SensorPod.
Control Panel
@
I
Power: on/ off
8
I
Warm Mist: on/off
(;:') I
Timer: 2h/4h/8h/72h
-/+
I
Target Humidity: decrease/increase
Filter Change Indicator
\if
I
Speed: AUT0/7/2/3
'-' I
Dimmer: on/off
Aromatherapy Use
Locate the Aromatherapy Tray (back of the
base) and pull down the lid. Add a few drops
of essential oil* to the absorbant
aromatherapy pad (provided) and close tray.
*
Only use 700% natural essential oils.
A
WARNING
. .
Do
not
add essential oils to the water
tank. Do not use synthetic fragrances.
""
@
I
HUMIDITY
LIC
•••
'_,
\il
<w.>
8
.
□
Cleaning Instructions
We recommend you regularly
clean your humidifier with a
clean, damp cloth.
A
1\
WARNING
. .
~
The water and
heater may cause burns.
Unplug the humidifier and let
cool before cleaning.
up to 33' (lOm)
8
l
Humidity Display(%)
8
SensorPod™ signal indicator
CB
/
I
,,
/
Filter Replacement
Filter Type
Water Filter
Suggested
Replacement
4 months*
Item Number
WSF300-0l
*Filter Change Indicator on control panel will glow
red to notify you to change.
Change the water filter before restarting after long
periods of non-use.
lJ.
N-300
support@trusens.com
I
7-833-TRUSENS (l-833-878-7367)
Support and Warranty Terms at www.trusens.com
EPA Est. No. 97667-CHN-l
Publicidad
