Technical Specifications; Simplified Eu Declaration Of Conformity - PNI ML50 Manual Del Usuario

Technical specifications

Frequency: 26 - 28 MHz
Maximum power: 600 W
S.W.R.: <1.1:1
Length: 480 mm
Impedance: 50 Ohm
Connector: SO239
Vertical polarization
Spike material: stainless steel
Temperature: -26°C ~ +80°C
Installation
Fix the antenna on a fixed support (e.g. PNI L1) previously mounted
on the car using the connector on the cable included in the package.
Connect and solder the PL259 plug to the other end of the cable.
Connect plug PL259 to a CB radio.
Measure the SWR of the antenna in an open area using a SWR-
meter.
In some cases, it may be necessary to raise or shorten the wire
to obtain an optimal SWR value. For maximum performance,
we recommend that this procedure be performed by qualified
personnel.

Simplified EU declaration of conformity

ONLINESHOP SRL declares that the PNI ML50 CB Antenna
complies with the EMC Directive 2014/30/EU. The full text of the
EU declaration of conformity is available at the following internet
address:
https://www.mypni.eu/products/7673/download/certifications
User manual 3 English