Silvercrest SBHS 50 C2 Instrucciones De Uso página 6

Technical data
Mains voltage
Power consumption
Temperature level 1
Temperature level 2
Protection class
Safety information
RISK OF ELECTRIC SHOCK
Connect the appliance only to a correctly installed mains
►
power socket supplying a mains voltage of 220 – 240 V ∼,
50/60 Hz.
To avoid potential risks, if the appliance power cable is
►
damaged, it must be replaced by the manufacturer, its
customer service or by a qualified technician.
Remove the plug from the mains power socket in case of
►
operating malfunctions and before you clean the
appliance.
Always pull on the plug to disconnect the appliance from
►
the mains; never pull on the power cable itself.
Do not kink or crush the power cable, and route the cable
►
so that it cannot be stepped on or tripped over.
Make sure that the power cable does not become wet or
►
moist during use. Route the cable in such a way that it
cannot be crushed or damaged.
To prevent risks, stop using the appliance immediately if it
►
is damaged.
Do not wrap the power cable around the appliance, and
►
protect it from being damaged.
SBHS 50 C2
220 – 240 V ∼ (alternating current), 50/60 Hz
50 W
approx. 120°C (+/- 15°C)
approx. 180°C (+/- 15°C)
II / (double insulation)
GB │ IE │
3 ■