Publicidad
PRODUCT ASSEMBLY
Strictly follow the instructions and sequence for assembling the product as shown in
the diagrams from 2 to 7.
2.Unfold the walker. When it is fully extended and locked you will hear a clicking sound.
3. Place the stoppers on the walker's basis.
4. Attach the seat to the walker, as you insert the clamps in the corresponding
openings.
5. Attach the toys to the toybar, as you be careful to insert the clamps into the holes.
6. After this, turn the clamps on left or right to lock the toys.
7. The baby walker is ready now to be used.
When unfolding the walker always check whether the supporting mechanism is
correctly secured before placing the baby in the walker.
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
Regularly check the condition of main parts and fastening elements for damages or
breakage. Do not repair the product yourself, but contact an authorized service center
or the sales agent from whom you purchased the product. Otherwise, your warranty
will be void. Periodically clean the product.
The plastic parts must be cleaned with wet soft cloth. The fabric of the walker must
be cleaned with warm water and soft soap. After cleaning leave the walker to dry well
before using it. Do not leave the product to the harmful effects of external factors -
direct sunlight, rain, snow or wind. This can damage metal and plastic parts and bleach
upholstery. Store the product in a dry and ventilated place, not in dusty, damp rooms
with very low or very high room temperatures.
Manufactured for Moni in PRC
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90, Website:
www.moni.bg
16
Publicidad
