Velleman HQ-Power HQMX11005 Manual Del Usuario página 5

4. Installation
•
Install the device in a clean and dry environment.
•
Before connecting the device to the power supply, fully turn down all the knobs and
faders to minimum, except for the channel EQ and pan controls, which should be
centred. Also, make sure all buttons are in the out position.
•
Next, connect all necessary cables, input devices (microphones...) and output
devices (amplifier, speakers...).
5. Description
Top + Front Panels
1. USB Input
Input socket for a USB stick.
2. USB Controls
Control buttons for the USB channel.
|<<
>||
>>|
VOL-
VOL+
display
3. Phono/Line/MP3
Select the input to be sent to the individual channel.
4. Cue
Select the channel(s) to be monitored by headphones.
5. Treble
Increase or reduce the highs of the input channel.
6. Bass
Increase or reduce the lows of the input channel.
7. Fader
Adjust the level of each channel.
8. MIC Level
Adjust the microphone volume level.
9. Cue Level
Adjust the headphone volume level.
10. Crossfader
Mix the signal of one channel with the signal of the other. If the crossfader is on the
centre position, both channels can be heard.
11. Sound Effects
Create sound effects and mix from the 8 pre-programmed effects.
12. Sound Effects Speed
Control the pitch of the selected sound effect.
13. Sound Effects Volume
Control the volume level of the selected sound effect.
14. Master Control
Adjust the level of the master output.
15. Master Level Display
Shows the level of the left and right master output.
V. 01 – 16/11/2020
Select the previous track.
Play or pause the selected track.
Select the next track.
Reduce the volume.
Increase the volume.
EQ Effect selection.
Information display.
HQMX11005
5 ©Velleman nv