EN
6. FUNCTION AND OPERATION
TEMPERATURE CONTROL
• Power Supply: DC 12V/24V.
• Display Screen Initialization: when the fridge is powered on, the buzzer will make a long beep
and the display will be on.
• Power ON/OFF: press
• Switch Refrigeration/freezer: press
or freezer (the screen will flash „Fr").
• Temperature Setting: press + or – for temperature setting. The setting will be saved automatic-
ally after stopping operating for 4 seconds (Note: the temperature displayed is the current tem-
perature of the compartment, it'll take a while to reach the set temperature).
• Battery Protection Mode: under the running state, long press
flashes, then press
(*Factory setting is High).
From left to right: Low/Medium/High.
Voltage reference:
INPUT
MODE
L
M
H
* The voltage is theoretical value, there may be a deviation in different sceneries.
* H should be set when the product is connected to car power. M or L should be set when it is con-
nected to a portable battery or other back-up battery.
SET SWITCH
LED DISPLAY
to switch ON/OFF.
to switch between refrigerator (the screen will flash „rE")
again to switch High, Medium and Low
DC 12V
CUT OUT
CUT IN
8.5V
10.9V
10.1V
11.4V
11.1V
12.4V
Mc Camping Compressor fridge MC-65L | 713512
ON/OFF SWITCH
for 3 seconds until the screen
CUT OUT
21.3V
22.3V
24.3V
18
DC 24V
CUT IN
22.7V
23.7V
25.7V