Bushnell TROPHY CAM HD ESSENTIAL Manual De Instrucciones página 13

and its current setting will be shown on the LCD. Pressing the RIGHT or
LEFT key scrolls to the next or previous parameter (RIGHT key to move on
to the next parameter and LEFT key to go back to the previous parameter),
and pressing the UP or DOWN key lets you select a different setting for the
currently displayed parameter. Once you have selected your preferred new
setting for a parameter, press the OK button to save the new setting (actually
change it). When have are finished changing the settings of one or more
parameters, press MENU again to exit the SETUP menu. MENU can also
be pressed anytime you want to cancel changing a parameter's setting after
a new setting has been selected (but OK has not been pressed yet). After
setting the parameters to your preferences, be sure to move the switch to
ON to begin actually taking photos or videos. No images will be captured if
the switch is left in the SETUP position (unless you press the RIGHT/Shot key
after exiting the menu)-in fact, the camera will power off automatically after a
few seconds with no key pressed.
Parameter Display
The settings for a parameter are shown on the display as follows:
Only one setting is displayed at a time, starting with the current setting
for the parameter when it is first selected (Fig. 4a). To change the
setting, use the UP/DOWN keys to display the new setting you want
(Fig. 4b), then press OK to "Execute" (make the actual change to this
setting). If you want to confirm this setting is now the current one, just
press the RIGHT key to scroll to the next parameter, then press LEFT
to go back again to the previous one. You should see the parameter
setting you just made.
13