ADJUSTMENT INSTRUCTIONS
ADJUSTING THE HANDLEBAR
4
Loosen the Knob (No. 21) and pull. Raise or lower the Handlebar Tube
21
(No. 4) to desired height. Tighten the Knob (No. 21).
ADJUSTING THE SEAT
Loosen and remove the Knob (No. 45) located under the Seat
6
38
Connecting Tube (No. 6). Move the Seat Cushion (No. 38) to desired
position, then re-tighten the Knob (No. 45).
45
ADJUSTING THE SEAT TUBE
6
To adjust the Seat Tube (No. 9), lift the Seat Connecting Tube (No. 6).
9
Remove the Pin (No. 31) from Front Connecting Tube (No. 3) and
raise or lower the Seat Tube (No. 9) to desired position. Re-insert the
1
31
Pin (No. 31) to secure. Then lower the Seat Connecting Tube (No. 6).
Raising or lowering Seat Tube (No. 9) will change the difficulty of your
3
exercise.
NOTE: Make sure Exercise Bands (No. 42) are not hooked to Main
Frame (No. 1) when adjusting the Seat Tube (No. 9). Do not extend the
Seat Tube (No. 9) to pass "MAX" line.
6
ADJUSTING THE EXERCISE BAND
You can adjust the difficulty of your exercise by adjusting the
42
Exercise Bands (No. 42). To reduce difficulty, unhook Exercise Bands
1
(No. 42) from the Main Frame (No. 1) and connect the Exercise Bands
(No. 42) to the hooks on the Seat Connecting Tube (No. 6).
6
42
1
ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable ride, you must ensure that
33
the bike is stabled and secured. If you notice that the bike is unbalanced
during use, you should adjust the End Caps (No. 33) located on the rear
stabilizer until the bike becomes levelled with the floor surface.
33
33
17