Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Instructions
1. Please wear personal protective equipment such as gloves, shoes, goggles, face
masks, etc. Do not wear rings. Wear close-fitting clothing. Protect your hair.
2. If you are not going to use this product for a long time, please disconnect the
charging cable from the product.
3. Please use this product in a tidy and well-lit environment
4. Place and store this product in a dry area. Keep it away from heat sources and
explosive goods.
5. This product is for home use only.
6. Do not work close to people, children in particular. Keep this product beyond the
reach of children.
7. This is not an anti-drop tool. Make sure to hold this tool steadily.
8. When drilling metal sheets, you need to place a block of wood under the metal
sheet. Otherwise, the metal sheets may spin out of control.
9. It is forbidden to use this tool on anything with an electric charge. When you are
using this tool, make sure that there is no wire or cables around (a metal detector
may need to be used for this purpose). Do not touch the chuck, socket or drill bit
with you hand.
10. Do not try to open, dismantle the tool. Only professionals using original parts are
allowed to fix or maintain this tool .
11. This tool does not require special maintenance. The same applies to the electric
part of the tool.
12. Plastic parts should be cleaned only after disconnecting the charging cable from
the tool. Do not immerse the tool. Clean the plastic part using soft and damp
cloth. It is forbidden to clean this product with organic solvents, alcohol or
gasoline.
Operation Guidance
How to charge this product?
Step 1: Insert USB port of the charging cable to an adapter (not included).
Step 2: Insert the DC port of the charging cable to the charging port of the
screwdriver. When the product is being charged, the red indicator light would be
solidly on. When the product is fully charged or disconnected from the charging cable,
the red indicator light would be off.
EN-3
Publicidad
