Xblitz S10 DUO Instrucciones De Uso página 20

etc.) are protected from being overwritten. If you use this function, you must
periodically format the memory card on your computer and then on the
camera. Ultimately, each file on the data carrier will be protected from being
overwritten and the device will not be able to record a further route - it will
not record in a loop. We suggest setting the sensor according to your driving
style and road conditions. You can also disable the option completely, in
which case each oldest file will be overwritten and the card will not need to
be formatted periodically. After adjusting the function, remember to format
the memory card.
4. The camera turns on and off
Check: PARKING MODE/MONITOR and MOVEMENT DETECTION - function
designed to operate while the vehicle is parked. You should deactivate the
functions, before setting off, as they may cause the camera to switch on and
off and make random fragments of route recordings.
If the functions are deactivated, check if the fault occurs without a memory
card inserted.
5. The camera records fragments of the route / randomly lasting recordings
Check: MOVEMENT DETECTION - function designed to operate while the
vehicle is parked.
You need to deactivate the function, before setting off, as it may cause the
camera to switch on and off and make random fragments of route recordin-
gs. If the function is deactivated, check if the fault occurs without a memory
card inserted.
6. The device shows the message „card full" or does not read the card
Check the „G-sensor" and „parking mode" functions and set them to mini-
mum. The card must be formatted in the computer in the FAT32 or exFAT file
system (depending on the card) and then in the recorder.
Check also: Is the selected card capacity and its specification (micro SD,
class 10 - U1, V10 additionally recommended) suitable for your device (we
recommend using cards from reputable manufacturers, we recommend:
Kingston, Samsung, Sandisk).
If at any stage you encounter an error, replace the card with a new one from
official distributors.
7. The device records noisy, distorted, unclear sound
The device has a very sensitive microphone that records all ambient noises.
Recorded sounds may overlap. Windscreen air vents may also distort the
sound.
8. The device does not respond
Briefly press the Reset button or reset the device to factory settings.
9. Transverse stripes appear on the recording
Incorrect setting of the frame rate value. Set the frequency value to „50Hz"
20