Publicidad
Idiomas disponibles
Idiomas disponibles
Foreword
Thank you for purchasing the Ibanez TA35 acoustic guitar amplifier.
Read this manual thoroughly prior to using your amplifier in order to get the most out of the functions available. Ensure that this manual is also stored in a safe place.
Features
The TA35 amplifier provides 35W of output and is mounted with 10-inch woofer and tweeter Ibanez original speakers. The pre-amp is equipped with vocal and guitar inputs.
The EQ employs bass and treble and a variable parametric EQ in the middle to produce a wide range of sound. Moreover, the speed and depth of the chorus effect (turned
ON/OFF by switch) can be controlled. The TA35 is also equipped with a built-in variable level reverberation function to bring out the depth of sound.
Reverberation is applied to the microphone pre-amp but EQ and chorus are not applied; this lets you control the sound of your guitar without affecting the signal from the mic.
Precautions During Use
• Do not subject the amplifier to shocks by dropping or rough handling.
• Install the amplifier in a stable location. The amplifier will sound differently depending on the method, location or venue of installation.
• Ensure that the power supply is switched OFF when the amplifier is not in use. Also remove the power cable from the power supply socket when the amplifier is not to be
used for an extended period of time.
• Do not use or store the amplifier in locations where it is subject to direct sunlight or in environments that experience dramatic fluctuations in temperature and humidity
levels.
• Reduce the volume to "0" or switch OFF the power supply when connecting the guitar shielded cable, the microphone cable, and cables connected to external units, such
as the effects. Note that the noise generated when plugs are inserted or removed may cause severe damage to the equipment.
• To avoid the danger of fire, do not place containers of liquid on the amp.
Names and Functions of Each Part
6
Publicidad
