Publicidad
Idiomas disponibles
Idiomas disponibles
SETUP
1.
Remove all components from the box.
2.
Place the seat frame face down (padded seat on floor).
INSTALLING AND ADJUSTING LEGS
1.
Locate the 4 legs.
2.
Press push button* on plastic leg sleeve end and slide the legs onto
the frame.
3.
Press push button on the leg adjustment end and slide leg extension
up or down to desired height.
4.
Repeat STEPS 1 through 3 for all the legs.
5.
Flip the chair over so that all 4 legs are level on the floor.
NOTE: Ensure all four legs are adjusted to the same height before use.
INSTALLING PADDED BACKREST
1.
Locate the backrest and two backrest support tubes.
2.
Slide the backrest support tubes through the two channel guides on
the bottom of the seat.
3.
Press the push button* until it clicks through the hole in the channel
guide.
4.
Repeat Steps 2 and 3 for the other tube.
5.
Align the backrest tubes with the backrest support tubes and slide
them onto the support tubes.
6.
Press both push buttons simultaneously and slide the backrest down
until the push buttons protrude through the holes.
NOTE: Ensure push buttons fully protrudes through the holes. An audible
"click" will be heard when the button is fully protruded.
Publicidad
