Adesso Bahama 4333-26 Instrucciones De Ensamblaje

Please visit our website or scan QR code to
view a Video on assembling our patent
pending No Tools Arms
A note on packaging:
Due to the fragile nature of this product, we have chose to
use Styrofoam only where it is needed to protect it and
deliver the best quality product to our customer. We are
aiming to reduce the use of plastic and styrofoam in the
packaging of our products where possible and are
investigating more environmentally friendly alternatives
to use. We hope you enjoy your purchase!
Assembly Instructions (English)
ASSEMBLY INSTRUCTION FOR
Bahama Arc Lamp
Model# 4333-26
Please begin assembly by laying all parts down on the ground. The
arms are easiest to assemble if you assemble them first, before they
are attached to the lamp body.
1. Assemble arc arms (A) ,(B) and (D) by placing the top arc tube into
the bottom arc tube and securing each arm by tightening each metal
collar joint (C). Simply slide joint (C) over the threaded tube and
screw down to tighen. If you have trouble here, slightly lift up the
upper arm to relieve the tension on the joint while screwing the parts
together.
Attention: Be sure to align the consistency of the curve on the arm.
Do not tighten the metal collar joints all the way yet. This way, when
you set the arms onto the base later, you can get the arm curves
perfect and then tighten the joints.
2. Fold the excess cord and insert into tube (E).
3. Place the curved tube (D) onto tube (E), then tighten it using hex
screw (O) with allen wrench (N).
Note: The Arc lamp should face forward with the arm reaching
over the base (see diagram below). Now you can make sure the
arm curves are aligned and tighten the joints.
4. Screw tube (E), (H) and (I) together until tight.
5. Insert tube (I) into base (J) & washer (K), then tighten it with nut (L)
using wrench (M).
6. Socket ring comes pre-assembled to the socket. Before placing the
shade onto the socket, please unscrew this socket ring.
7. Place shade (P) onto socket holder and turn the socket ring (Q)
until tight to secure shade.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to reduce the risk of
electric shock (one blade is larger than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.Do
not use with an extension cord unless the plug can be fully inserted.
DO NOT ALTER THE PLUG .
----------------------------------------------
BULB TYPE: type A Max 100W bulb (bulb not included).
PARTS DIAGRAM:
(1)* HEX screw (O) (1)* Allen Wrench (N)
4333-26
th nd
353 West 39 Street 2 Floor New York, NY 10018
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
1.0