Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
POWER AMPLIFICATION SECTION
RATED POWER & LOAD:
60 W RMS into 16, 8 ohms
POWER @ CLIPPING:
(Typically @ 5% THD. 1 kHz, 120 V AC line)
65 W RMS into 16, 8 ohms
FREQUENCY RESPONSE:
+0, -3 dB. 50 Hz to 20 kHz @ 50 W RMS into
8 ohms
HUM & NOISE:
Greater than 74 dB below rated power
POWER AMP EQ:
Active Presence: +10 dB @ 2 kHz
Active Resonance: +10 dB @ cabinet resonat
frequency
POWER CONSUMPTION: (Domestic)
200 watts 50/60 Hz, 120 V AC
PREAMP SECTION
The following specs are measured @ 1 kHz with the
controls preset as follows:
Low & High EQ @ 10
Mid EQ @ 0
Bright out
Lead & Rhythm Posts @ 10
Presence & Resonance @ 0
Reverb <§> 0
Nominal levels with Pre Gains @ 5
Minimum levels with Pre Gains @ 10
PRE AMP HIGH GAIN INPUT:
Impedance: Very high Z, 470K ohms
Lead Channel:
(with channel select in)
Nominal Input Level: -80 dBV, .1 mV RMS
Minimum Input Level: -92 dBV. .025 mV
RMS
Clean Channel:
(with channel select out)
Nominal Inpul Level: -21 dBV. 85 mV RMS
Minimum Input Level: -32 dBV,, 25 mV RMS
Maximum Input Level: 0 dBV 1.0 V RMS
(Subtract 16 dB with Crunch switch in)
PREAMP LOW GAIN INPUT: (-6 dB pad)
Impedance: High Z, 44K ohms
All levels are increased by +6 dB
EFFECTS SEND:
Load Impedance: 47K ohms or greater
Nominal Output: -10 dBV, 300 mV RMS
EFFECTS RETURN:
Impedance: Very High Z, 470K ohms
Designed Level: -10 dBV, 300 mV RMS
PREAMP OUT:
Load Impedance: 47K ohms or greater
Nominal Output: +10 dBV, 3 V RMS
REMOTE FOOTS WITCH:
Special 2 button unit with LED indicators
(supplied)
Channel select & reverb
SYSTEM HUM & NOISE @ NOMINAL
LEVEL: (clean channel)
(20 Hz to 20 kHz unweighted)
Greater than 60 dB below rated power
EQUALIZATION:
Custom Low, Mid, & High passive type EQ
Push Bright (Rhythm channel only)
+6 dB @ 2 kHz
Push Crunch (Rhythm channel only)
Increases gain
DIMENSIONS:
24.125" (H) x 30.125" (W) x 12" (D)
WEIGHT:
84.5 lbs.
Features and specifications subject to change without notice.
Publicidad
