Intellinet Network Solutions 150101 Manual De Instrucciones página 3

operation
There are two ways to control PC switching: using the top-panel push buttons
or a hotkey sequence. (For audio/mic switching, use the hotkey command as
listed on the Quick Reference Chart at the back of this manual.)
Top-Panel Buttons
The top-panel buttons (on top of the device) allow you direct control over PC
port switching: Simply press a button to switch to the corresponding PC port.
By default, PC port switching and audio/mic port switching are bound
together (both will be switched simultaneously). To disable the binding, hit
ScrLk +ScrLk + W on the keyboard. To re-enable the binding of PC and audio/
mic port switching, use the hotkey sequence ScrLk + ScrLk + Q.
Keyboard Hotkeys
A keyboard hotkey sequence consists of at least three specific keystrokes:
ScrLk + ScrLk + Command key(s). NOTE: The two consecutive ScrLk keystrokes
and the command key or keys that follow need to be pressed within 2 seconds
of each other; otherwise, the hotkey sequence won't be validated.
To use a preceding sequence other than two consecutive Scroll Locks, there
are two options:
Option 1
• Hit ScrLk + ScrLk + H or press and hold down the last front-panel button
(Button 2 or Button 4) for more than 8 seconds.
• Press the key you would like to use as your preceding sequence (SCROLL
LOCK, CAPS, ESC, F12 and NUM LOCK keys are your choices). Now you can
use the new preceding sequence to execute your hotkey commands.
Option 2
• Press the last front-panel button (Button 2 or Button 4) for more than 3
seconds.
• Press the key you would like to use as the preceding sequence.
3
English