Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Workflow:
Signal transmitting
Trigger contact/detector or
activate remote control
Max. distance
(in open area) ≤ 80m
Extend Transmission Distance between Control Panel and Siren
First, press the 'Learning Button' upon the repeater, you will hear
a short beep. After that, press SOS button or 'Arm' the control
panel; if it is successfully paired, a two-second length 'beep' will
sound with blue light on, and light will alternately shining between
blue and green. Transmission distance between control panel and
siren is therefore extended.
If the repeater does not receive any signal within 1 minute, the
pairing process will be canceled, it would sound beep twice
meanwhile.
Workflow:
Signal transmitting
Control panel arm/
disarm/alarm
Max. distance
(in open area) ≤80m
Signal transmitting
Control panel receives
Repeater receives
signals
signals
Max. distance
(in open area) ≤ 120m
Signal transmitting
Repeater receives
Siren receives
signals
signals
Max. distance
(in open area) ≤ 120m
Deleting Accessories
To remove all paired accessories, you only need to press and hold
'Learning Button' upon the repeater for five seconds; indicator
light would turn blue, wait two seconds until the light turns green
with three times beeps, then you would successfully remove all
accessories.
Specifications
Power Supply:
AC 110V-240V, 50/60Hz
Wireless Transmitting Range:
< 150m
Wireless Receiving Range:
< 80m
Radio Frequency:
868MHz (±75KHz)
Static Current:
< 20.5mA
Transmitting Current:
< 330mA
Maximum Accessories Supportable:
Back-up Battery:
3.7V 600mAh Lithium Battery, 2.22Wh
Housing Material:
ABS plastic
Operating Condition:
Temperature: 0°C ~ +55°C
Relative Humidity: < 80% (non-condensing)
Dimension (L x W x H):
140 x 86 x 87mm
40 PCS
EN
Publicidad
