Publicidad
Idiomas disponibles
Idiomas disponibles
Clean brushroll
1.Move the brushroll release button along the
arrow direction remove side cover.
2.Remove one end of the brushroll and take it
out from nozzle for cleaning.
3.After cleaning or replacing brushroll, assemble
it back in opposite sequence of disassembly.
(Fig 17)
Storage of Vacuum Cleaner
When the vacuum is long idled, remove the
battery, pack the product and store it in a cool
and dry place, do not put in direct sunlight or
humid environment.
Battery pack disassembly
Press the battery release button, remove the
battery pack in the arrow direction and place
the battery in a plastic bag, then store it in a dry
place.(Fig 18)
Trouble Shooting
Please check the following issues before sending to designated repair agent.
Trouble
Possible Causes
Battery has no power
Motor does not
Metal tube,floorhead, battery
work
pack and vaccum cleaner is not
assembled correctly
Dust cup is full
Suction drops
Filter blocked
Floorhead air path blocked
Battery not fully charged
Short run time
after charging
Battery old aging
When there is electric components defect,which needs professional after service person for
instruction or repairing, LED screen will display the defect warning with error code of F1 to F8.
Please contact after service of local agent and provide error code.
10
17
Brushroll release
button
18
Battery release
button
Solutions
Charge the vacuum cleaner
Check the accessories are
assembled correctly to the vacuum
cleaner
Clean dust cup
Clean or replace filter
Clean floorhead air path
Follow instruction manual to fully
charge the battery
New batteries can be bought from
local distributor
Publicidad
