Publicidad
Instruction manual
Very important: Please read this manual fully before using your freezer.
This manual has been designed so that the text references to the relevant drawings.
0
Identifi cation
Identify the model of your freezer ("a", "b",
"c") by comparing the control panel with the
illustrations.
Your freezer is a NO FROST model if NO
FROST appears on the control panel.
1
Installation
1.1 Unpacking. Remove all the packing
materials.
1.2 Location. Position the freezer away from
heat sources and protected from direct
sunlight to reduce consumption.
Do not install the freezer outside or
anywhere it is exposed to rain.
Also check that the shelves have been
fi tted correctly, and place storage
containers apart to prevent any vibrations.
1.3 Electrical connection. Stand the freezer
upright for at least 2 hours before plugging
it in. Check the information on the rating
plate (1.3.1, 1.3.2).
Do not use any adapters or extension
leads.
Make sure that the lead is not touching the
motor or trapped underneath it.
The plug from the socket must be
accessible after the appliance has been
installed.
1.4 Climate class. This appliance is designed
for optimum operation at an ambient
temperature of + 50 ºF to + 109 ºF,
climate class SN-T (1.3.2). Outside this
temperature range, the performance of the
appliance may be affected.
1.5 Size of recess. See the type of appliance
on the registration plate (1.3.1, 1.3.2) to
determine the size of the recess in (1.3.3).
2
Use
2.1 Switching on the freezer. Press the
button (2.1.1) or turn the control (2.1.2,
2.1.3). The On light
up to indicate the appliance is switched
on.
2.2 Setting the temperature. Press the
,
buttons (2.2.1) or turn the control
(2.2.2, 2.2.3). When you have selected the
temperature you want, you can press the
keys for 5 seconds to see this
(2.2.4). The temperature will fl ash. Models
do not have this function.
Recommendation: The recommended
temperature for your freezer is
If you want to freeze, the recommended
temperature is
ºF. See 2.3. (Fast
cooling function)
Remember that the temperature inside
the freezer depends on the ambient
temperature, the location and how often
the freezer door is opened.
2.3 Freezer functions.
Fast cooling function: This function
makes the freezer work at the minimum
temperature for a maximum of 52 hours.
We recommend you use this function
whenever you put large quantities of food
in the freezer. You should activate the
function 24 hours in advance. To activate
and deactivate it: Press
(2.3.2, 2.3.3).
ECO setting: The ECO setting gives
substantial energy savings and keeps
the freezer at a stable temperature.
This function stays active even after a
power cut. When using this mode, we
recommend you store all the food on the
shelves in the centre. To activate or switch
off press
(2.3.4). Models
not have this option.
Quick cooling function: Put the bottle
or bottles into the freezer and press
for a few seconds until the
appears (2.3.5). The freezer will supply
cold for 15 minutes, after which time the
function fi nishes,
will fl ash and an alarm
will sound for 20 minutes, telling you it is
english
US
models will light
,
ºF.
(2.3.1) or
do
icon
17
Publicidad
