CASO DESIGN AF100 Manual Del Usuario página 31

14 Operation and Handling
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
Please note
► This device is only intended for use in households in enclosed spaces.
14.1 Before initial use
 Thoroughly clean the basket and the pot with hot water, some washing-up liquid and a
non-abrasive sponge.
Please note
► You can also clean these parts in the dishwasher.
 Wipe the inside and outside of the appliance with a moist cloth.
14.2 Secure switch
This appliance is equipped with a secure switch. When pulling the pot out of the fryer
during it's working, the fryer will stop heating and timer on hold automatic until the pot is
put back.
Please note
► It's better to pull out the pot not longer than 30s, to make sure the stable temperature
inside the pot to have better result.
This appliance is equipped with a secure switch. When pulling the pot out of the fryer
during it's working, the fryer will stop heating and timer on hold automatic until the pot is
put back.
14.3 Commissioning
1. Connect the main plug into a socket.
2. Turn the knob for the time from 1-30 minutes and knob for temperature up to 200°C.
The device will start heating process once time is set. The red LED will light up. It will
turn of once temperature is reached. The green LED will light as long as device is on.
3. Let the device preheat for 3-4 Min. without food or add 3 Min. to your cooking time.
4. Pull out the frying basket on the handle and fill it with your desired food.
Please note
► Never fill the basket exceed the amount indicated in the table, as this could affect the
quality of the end result.
5. Slide the pot back into the fryer.
Please note
► Never use the pot without the basket in it.
caso AF100 31