LaserLiner MultiFinder Plus Manual Del Usuario página 12

Completely read through the operating instructions, the
„Warranty and Additional Information" booklet as well
!
as the latest information under the internet link at the
end of these instructions. Follow the instructions they
contain. These documents must be kept in a safe place
and passed on together with the product.
Intended use
This location device is designed to locate metal (iron and
copper) and to identify supporting structures (metal and
wood) in drywalling applications. The device is also suitable
for locating live and non-live lines under plaster.
Safety instructions
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– The structure of the device must not be modified in any way.
– Do not work alone in the vicinity of hazardous electrical
installations and only under the guidance of a qualified
electrician.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– Switch off the device before removing the battery.
– The device must no longer be used if one or more of its
functions fail, the battery charge is weak, or the housing
has been damaged.
– Take particular care when the AC warning is displayed
(corresponds to voltages > 50 Vrms)
– Attention: The voltage warning display may become
unreliable due to shielded cables or insulation, and dangerous
voltage may be present even if it is not displayed as such.
– The measuring device must not be used as a substitute for
a two-pole zero potential test.
Additional information on use
Observe the technical safety regulations for working on
electrical systems, especially: 1. Safely isolating from power
supply, 2. Securing to prevent system being switched on
again, 3. Checking zero potential, two-pole, 4. Earthing
and short-circuiting, 5. Securing and covering adjacent
live components.
12
EN