Husky HOTC4116B12S Guía De Uso Y Mantenimiento página 8

Operation
1
Locking and unlocking the unit
IMPORTANT : The drawers must be fully closed before
locking / unlocking the unit.
□ To lock the unit, insert the key (J) into the lock cylinder (K)
and turn it 1/4-turn to the left. Then remove the key.
□ To unlock the unit, nsert the key (J) into the lock cylinder (K)
and turn it 1/4-turn to the right. Then remove the key.
J
3
Installing the drawers
□ Pull the slides and slide carrier out until fully extended.
□ Hold the slide on the cabinet while aligning it with
the slide on the drawer.
□
Slightly insert one side and repeat for the other side.
□ Slowly push the drawer until it is fully closed to
engage the slide.
□ Open the drawer and close it to verify proper
operation.
All manuals and user guides at all-guides.com
2
8
Removing the drawers
□ Fully extend and empty the drawer.
□ Depending on the slide, either lift or lower the
release lever on both sides so the slides can ride over
the stops. Pull out to remove.