Publicidad
Idiomas disponibles
Idiomas disponibles
Tools Required:
HOW TO REPLACE THE FUSE:
This plug contains an electrical fuse a safety feature.
• Disconnect power before replacing the fuse.
• Grasp plug and remove from the receptacle or other outlet device.
• Do not unplug by pulling on the cord.
• Slide open by unscrew the fuse access cover on top of attachment plug.
• Remove old fuse carefully.
• Never attempt to replace the fuse with a higher watt fuse.
Use only 5 A, 125 V fuse. Failure to do so may be a fire hazard.
• Set new fuse in holder and reinstall access cover.
HOW TO INSTALL TAPE LIGHT
mounting means of this product, refer to the Accessories Part.)
12 mm .
G .
••
C
B
Figure 1
Product connection
Locate and unfasten the first coaxial connector of the additional set to remove the control box.
•
Connect the exposed connection with open end connector from the first set
•
Repeat for all additional sets.
•
Connect up to 5 sets only of GE brand StayBright
•
For questions and/or assistance, call customer service at 1-877-398-7337 or visit us on the web at
PRINTED IN VIETNAM
©2023 Nicolas Holiday Limited, Suite 2706 Skyline Tower, 39 Wang Kwong Road,Kowloon Bay, Kowloon, Hong Kong
.
Accessories(Inclused):
Part
Descrip on
Quan ty
A
Fuse
1
B
Screw
14
C
Clip
7
B
C
Figure 2
NV 0323
All rights reserved.
A
(Figure 1. 2. 3 depends on the intended
.
.
B
C
Figure 3
sets ONLY.
®
B
C
cover
fuse
C
Figure 4
www.geholidaylighting.com
MADE IN VIETNAM
Publicidad
