Publicidad
Idiomas disponibles
Idiomas disponibles
Page 10
Retrofit Installation
11
Install Knockout Plate, Connect Wires and Install Wiring Panel
• Use proper UL-approved connectors to secure wiring to the Knockout Plate provided in Parts Bag.
• Connect wires as shown in wiring diagram.
• Do not use a dimmer switch to operate the light.
2
Screw from
Parts Bag
Fan
• See OPERATION section on page
12 for details.
• MASTER switch turns fan system on
along with motion control and shuts
them off for cleaning and maintenance
purposes.
• MASTER switch may be located where it
is not easily accessed for everyday usage;
it may need to be labeled and located
where it can't be turned on without being
seen from fan to comply with local and
national codes.
Attach cable
1
clamps to
Knockout Plate.
Knockout Plate
mounts to inside of
Housing and may
be oriented
as desired.
3
Connect wires
120 VAC
Light
LINE IN
Screw set
aside in
Step 6
5
GRD
WHT
BLK
STANDARD OR
MULTI-FUNCTION
WALL SWITCHES
MASTER
LIGHT
BLACK
WHITE
ORANGE
NIGHT
MASTER
LIGHT
LIGHT
STANDARD OR
MULTI-FUNCTION
WALL CONTROLS
(purchase separately)
ZN80ML n ZN110ML Installation Guide
4
GRD
WHT
BLK
RED
14/3
NIGHT
LIGHT
14/2
BLK
WHT
RED
GROUND
(green or bare)
BLUE
LIGHT RECEPTACLE WIRES
BROWN
SWITCH
BOX
KNOCKOUT
PLATE
120 VAC
LINE IN
6
WHT
BLU
LIGHT
RED
NIGHT
LIGHT
BLK
FAN
BLK
BRN
SENSOR/
CONTROL
ORG
WHT
RECEPTACLES
FAN RECEPTACLE
WIRES
Publicidad
