1.7 Safety instructions
WARNING
Fire hazard from heat sources.
The product is made of wood and/or ot-
her combustible materials.
►Keep the product away from heat
sources such as heating pipes or open
flames.
CAUTION
Risk of injury from jumping or romping on
the product.
Romping around or jumping can lead to
injuries and damage to property.
►Ensure that there is no jumping or rom-
ping on or in the product.
►Close the drawers slowly and carefully
to avoid crushing.
CAUTION
Injuries and property damage.
Modification of the product may result in
personal injury and property damage and
will void the warranty.
►Only use the product with the original
parts supplied and in the original con-
dition.
►Only use spare parts approved by the
manufacturer.
CAUTION
Risk of injury.
►Set up the product in a stable position.
►Only transport the product disassem-
bled.
NOTICE
Material damage.
Pointed, sharp and scratching objects
can damage the product when opening
the packaging.
►Protect the electronics of the device as
well as electronic parts from moisture
and humidity.
2. Description and function
This product is a dressing table with a lighted
mirror. The dressing table has a drawer integra-
ted into the table and a shelf each, which is lo-
cated to the right and left of the mirror.
3. Unpack and check
3.1 Unpacking the product
WARNING
Risk of suffocation from packaging material
and from swallowing small parts.
►Dispose of the packaging material
in the household waste according to
regulations.
►Store the packaging and small parts
required for repackaging away from
moisture and out of reach of children.
NOTICE
Material damage.
Pointed, sharp and scratching objects
can damage the product when opening
the packaging.
►Do not use any pointed, sharp or scrat-
ching objects to open the packaging
►Be careful with the following work.
1. Pull off tape and tie-down straps by hand or
use scissors.
2. Set the box up with the directional arrows po-
inting up.
3. Open the packing carton.
4. Remove all parts from the box.
5. Lay the pieces side by side on a clear, soft,
and level surface.
6. Check the scope of delivery for completeness
and intactness, see chapter "14. Part list" on
page 42.
3.2 Checking the scope of delivery
NOTICE
Material damage.
Using defective parts or parts that are in-
complete can damage the product.
►Check the scope of delivery for com-
pleteness and integrity.
►Do not use the product with missing or
broken parts.
EN
13