BEFORE FIRST USE
•
Remove all packing material and stickers from the product and save instruction manual.
•
Cut and remove tie wrap located between the electric plug blades.
•
Before using your new appliance, wipe the base of the kettle with a damp cloth.
•
Wash the kettle with warm sudsy water.
•
Place appliance on a flat stable surface.
Caution: Because some countertop finishes are more sensitive than others, use care not to place kettle
on surfaces where heat may cause damage.
•
Pour fresh cold water into the water reservoir up to MAX level.
•
Close the kettle lid.
•
Put the kettle on the base.
•
Unwind the cord and plug into a standard 120 Volt AC outlet.
•
Press the ON button (I/O) to boil the water.
•
After boiling is finished, press the OFF button (I/O).
•
Remove the kettle from the base.
•
Push the lid release button to open the lid.
•
Dispose the hot water in the sink.
Note: Boil water at least 2 times and dispose, before boiling water for consumption. This removes any
dust or residue that may remain in the system during the manufacturing process.
•
Unplug unit.
HOW TO USE YOUR KETTLE
•
Pour fresh cold water into the water reservoir up to MAX level.
Caution: Do not fill above the "MAX" indication level. Do not operate kettle if water is below minimum
mark-ing. If the kettle is overfilled, boiling water may be ejected.
•
Close the kettle lid.
•
Put the kettle on the base.
•
Unwind the cord and plug into a standard 120 Volt AC outlet.
•
Press the ON button (I/O) to boil the water.
Electric Tea Kettle
USE AND CARE INSTRUCTIONS
7