Descargar Imprimir esta página

Vitadomia TRB01 Instrucciones De Usuario página 5

Rollator de aluminio 3 ruedas

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Aluminium 3-Wheeled Rollator
Please make sure that you read and follow these instructions carefully. Failure
to do so can result in injury. Keep these instructions in a safe place for future
reference.
Maximum weight
1.0 • INTENDED USE
supported
The 3-Wheeled lightweight aluminium rollator is designed
to give support and aid to those who cannot, or who lack
lbs
Kg
the confidence to, walk without some level of guidance.
253 lbs
This rollator is intended for indoor and outdoor use.
2.0 • SAFETY
The maximum user weight must not be greater than 253 Ibs.
Make sure that the rollator is locked in the open position before use, see section
4.1.
Only use as a walking aid in the forward direction. Do not make adjustments to
the rollator unless it is stationary.
Do not use on stairs or escalators and take care on steep hills.
Do not hang items from the handles as this will affect the stability of the rollator.
The maximum load weight for the rollator bag must not be greater than 5kg.
3.0 • UNPACKING
Refer to Figure 2.
Remove the packaging and check all parts carefully. Contact your supplier immediately
if parts are missing or damaged and do not try and assemble.
Contents :
1
1. Main Frame & Front Wheel x 1
2a
2a. RHS Handle
2b
2b. RHS Rear Wheel x 1
3a
3a. LHS Handle
3b. LHS Rear Wheel x 1
3b
4.
4
Bag x 1
5.
Handwheel x 2
5
Handwheel Bolts x 2
6
4.0 • ASSEMBLY
4.1 • Unfold the Rollator
Refer to Figure 2 and Figure 3.
Gently pull the main frame apart until the spring locks the cross-bar open.
4.2 • Attach the Wheels
1.
Refer to Figure 2 and Figure 4.
Slot the RHS wheel frame tube into the RHS main frame tube.
Note: the rear wheel brake mechanism must face the external side of the rollator.
2.
Align the holes and insert a handwheel bolt.
3.
Make sure that the handwheel bolt has located into the hexagonal slot.
4.
Refer to Figure 5.
Attach the handwheel
Note: make sure that the handwheel is located on the internal side of the frame.
5.
Repeat for the other wheel.
USER INSTRUCTIONS
5
6
, to the handwheel bolt
and tighten.
5
FIGURE 1
2a
2b
1
3a
3b
FIGURE 2
Crossbar
FIGURE 3
1
2
FIGURE 4
4
6
5
3

Publicidad

loading