Publicidad
Idiomas disponibles
Idiomas disponibles
global_main.book.book Page 11 Friday, April 5, 2024 5:07 PM
Installation Place
Requirements
Before installing the appliance, check the following
information in order to install the appliance in a
correct place.
Unpacking Shipping Material
1
Lift the appliance off of the foam base.
• After removing the carton and shipping
material, lift the appliance off the foam base.
• Make sure the plastic tub support
off with the base and is not stuck to the
bottom of the appliance.
• If you must lay the appliance down to
remove the carton base
the side of the appliance and lay it carefully
on its side. Do not lay the appliance on its
front or back.
2
Remove the foam tub insert.
comes
a
NOTE
, always protect
b
• Once removed, save the foam insert for future
use. If the appliance needs to be moved, the
foam insert will help prevent damage during
transportation.
3
Installation Location
• Install the appliance on a flat floor of hard
material that is strong enough to support a fully
loaded appliance. (Allowable slope under the
appliance: 1º)
• Never try to level any uneven floor by putting
pieces of wood, cardboard or similar materials
under the appliance.
INSTALLATION
• To prevent damage, do not remove the foam
insert
from the tub until the appliance is in
c
the final location.
Unfasten the power cord.
• Unfasten the power cord from the back of
the appliance.
11
Publicidad
