homeTro HT1 Manual De Usuario página 15

STEP 7: Installation of the Pedals
Installation Tools
Installation Standard Parts None
Installing Instructions
1. Take out the foot pedal marked with "R", then put it into the
right crank threaded hole, turn it clockwise until it can't be
turned, and then lock it with our special open-end spanner.
2. Take out the "L" foot pedal, put it into the threaded hole of the
left crank, turn it anticlockwise until it can't be turned, and then
lock it with our special open-end wrench.
Note: The crank is also marked with "L" and "R" corresponding
to the markings on the foot pedal, if installed in reverse, it
may lead to crank slippage and damage to the product. The
foot pedal must be locked, otherwise the pedal may fall off
after a period time.
US/UK 13
13-15mm