Publicidad
Idiomas disponibles
Idiomas disponibles
U S E R M A N U A L
TECHNICAL DATA
Parameter description
Parameter value
Product name
Water dispenser
Model
BCTP-5-L
Rated power [W]
680
Rated voltage [V~]/
230/ 50
Frequency [Hz]
Tank's capacity [l]
5
Dimensions [mm]
305x230x405
Weight [kg]
2,65
Protection class
I
Protection rating
IPX0
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
Legend
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Electric shock warning.
Attention! Hot surface, risk of burns.
Only use inside.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
2. Usage safety
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
EN
Whenever „device" or „product" are used in the warnings
and instructions, it shall mean Water dispenser. Do not use
in very humid environments or in the direct vicinity of water
tanks. Prevent the device from getting wet. Risk of electric
shock! Do not cover the ventilation openings.
2.1. Electrical safety
a)
The plug has to fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b)
Avoid touching earthed elements such as pipes,
heaters, boilers and fridges. There is an increased risk
of electric shock if the earthed device is exposed to
rain, in direct contact with a wet surface or operating
in a humid environment. Water ingression into the
device increases the risk of damage to the device and
of electric shock.
c)
Do not touch the device with wet or damp hands
d)
Use the cable only in accordance with its designated
use. Never use it to carry the device or to pull the
plug out of a socket. Keep the cable away from heat
sources, oil, sharp edges or moving parts. Damaged
or tangled cables increase the risk of electric shock.
e)
If using the device in a humid environment cannot
and
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
2.2 Safety at the workplace
a)
Make sure the workplace is orderly and well lit.
A messy or poorly lit workplace may lead to accidents.
Try to anticipate what may happen, observe what is
going on and use common sense when working with
the device.
b)
Do not use the device in an explosion hazard zone,
for example in the presence of flammable liquids,
gasses or dust. The device generates sparks which
may ignite dust or fumes.
c)
Upon discovering damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
d)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f)
If a fire starts, use solely powder or carbon dioxide
(CO
) fire extinguishers suitable for use on live
2
devices to put it out.
g)
Use the device in a well-ventilated space.
REMEMBER! When using the device, protect
children and other bystanders.
2.3. Personal safety
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The machine is not designed to be handled by
persons (including children) with limited mental
and sensory functions or persons lacking relevant
experience and/ or knowledge unless they are
supervised by a person responsible for their safety
or they have received instructions on how to operate
the machine.
8
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration whilst
using the device may lead to serious injuries.
d)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
e)
Do not overestimate your abilities. When using the
device keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
2.4. Safe device use
a)
Do not overload the device.
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and have to be repaired.
c)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation..
d)
When not in use, store in a safe place, away from
children and people not familiar with the device, who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
e)
Maintain the device in a good technical state.
f)
Keep the device out of the reach of children.
g)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
h)
To ensure the operational integrity of the device, do
not remove factory fitted guards and do not loosen
any screws.
i)
It is forbidden to move, adjusting and rotating the
device in the course of work.
j)
Do not leave this appliance unattended while it is in
use.
k)
Clean the device regularly to avoid a durable
encrustation of dirt.
l)
Do not immerse the device in water and do not allow
water to enter the device housing.
m)
Before disconnecting the device from the power
supply, switch the device off using the main ON /
OFF switch.
n)
The device becomes very hot during use. Be
especially careful when touching the device. There is
a high risk of burns.
o)
During operation of the device, hot steam gathers
inside it. Be careful when being near the device and
opening the lid. There is a high risk of burns
p)
Avoid all spills. Damaged and leaky device must be
forwarded to the manufacturer's service centre for
repair.
q)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
r)
Do not pour water directly from the tap into devices
connected to electricity.
s)
The device may only be used in an upright position.
t)
Do not turn on the empty device (without water).
u)
Do not direct the steam outlet towards furniture,
walls or electrical devices and components.
v)
Do not cover the ventilation openings.
w)
Always make sure that the device lid is properly
closed.
x)
Lift the device by holding the handle
EN
3. Use guidelines
The hot water dispenser is a device designed for boiling
and maintaining water at a selected temperature which
you can use to brew coffee, tea, instant dishes and to serve
warm drinks or clean, warm water.
The user is liable for any damage resulting from
nonintended use of the device.
3.1. Device description
1
2
3
8
Reboil
Clean
7
TEMP
Unlock
SET
1.
Diode: cooking
2.
Diode: empty container
3.
Diode: mode of maintaining the heat
4.
Diode: deactivation of the dispensing lock
5.
„Unlock" button deactivates the dispensing lock
6.
„TEMP SET" button to change the temperature of
keeping the heat
7.
„Clean" button – cleaning mode switch
8.
„Reboil" button – for reboiling water
a
b
l
c
k
d
j
i
e
f
g
h
a.
Manual pump button
b.
Manual pump position indicator (locked / unlocked)
c.
Lid
d.
Automatic dispensing button
e.
Water level indicator
f.
ON / OFF main switch
g.
Power supply cord
h.
Basis
i.
Device housing
j.
Water outlet
k.
Control panel
l.
Lid lever
3.2. Preparing for use
Appliance location
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
9
4
5
6
Publicidad
