ErgoAV ERTSL1-01B Manual De Instrucciones página 14

Step 6B
For Wooden Stud Installation
●
DO NOT USE ANCHOR [Z4] FOR THIS STEP!
X
● Any material covering the wall must not exceed 5/8 in (16 mm)
● Nominal wood stud size: common 2 x 4 in (51 x 102 mm) minimum 1½
x 3½ in (38 x 89 mm)
● Stud center must be verified by using an awl or stod finder
Pencil
(Not lncluded)
Z3
Z1
Note: Each strap must be
mounted to a separate stud.
OR
Awl
(Not lncluded)
Stud Finder
(Not lncluded)
14
1/8 in (3mm)
1/8 in (3mm)
Wood Drill Bit
Phillips Screwdriver
(Not lncluded)