TCL RF282BSE0 Instrucciones De Funcionamiento página 9

This refrigerating appliance is not intended to be used as a built-in appliance
630mm
595mm
Preparations prior to use
1. Remove all packing assemblies such as case fixing tape etc., especially the foam base.
2. Use warm wet cloth to clean both interior and exterior of the refrigerator, (neutral detergent can
be added in warm water).
3. After leveling and cleaning the refrigerator, stand it for about 5 hours before plugging the power
plug for powering on, and cool the refrigerator for 2 to 3 hours before storing foods.
1. Remove fixing tape
In hot summer, 24 hours are
needed to fully freeze the food.
Check the refrigerating condition
on the second day.
The appliance should be located in the coolest area of the room, away from heat producing appliances or
heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the
compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down
on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with
cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many items as needed
at one time, and close the door as soon as possible.
Please refer to the product introduction picture on page 5 for the placement of accessories.
730mm
795mm
2. Connect to power
Wipe with
warm and
wet cloth
1390mm
3. Store food after
connecting to power
for 2-3 hours
The plastics deodorant will disappear
automatically after freezing for a while.
7
1025mm
Do not open the
doors frequently
to save electricity.