Buffalo CU899 Manual De Instrucciones página 6

EN
Control panel
• Before using the appliance, ensure all thermostats are at the "0" position.
• During operation, take care of your rings, watches and similar objects as they may become hot.
Operation
1. Place suitable cookware on to the centre of the desired cooking zone.
2. Switch the appliance on at the power supply.
3. Set the thermostat to desired power setting. The appliance will start to work and the operating
indicator light will light up Green.
Level 1
Power (W) 300
4. To turn appliance off, just set the thermostat to "0".
Operating indicator light mode
When power level 1-11 is set
and a pan is detected
When power level 1-11 is set
but no pan is detected
When power level 0 is set
Auto shut-off function
The appliance will shut off automatically when left idle for about 4 hours.
Overheat protection function
If the pan becomes too hot the appliance will switch off and a buzzer will sound. Should this happen,
allow the appliance to cool before restarting.
Cleaning, Care & Maintenance
• Turn the appliance off and disconnect from the power supply. Allow the appliance to cool before
cleaning and maintenance.
• Use warm, soapy water and a damp cloth to clean the appliance.
• DO NOT use abrasive cleaners or pads.
• Dry thoroughly after cleaning.
• For optimal product performance, it is recommended to regularly apply some vegetable oil to the
cooking surface.
6
CU899_ML_A5_v2_20230613.indb 6 CU899_ML_A5_v2_20230613.indb 6
Thermostat Operating indicator light
2 3 4 5
500 700 900 1100
Lighting up Green
Flashing red for up to 60 seconds, during which if a pan is
replaced, the appliance will stay On. Otherwise, it will switch off.
To re-use the appliance, turn the thermostat to "0" then set the
desired power level.
No light on
6 7 8 9
1300 1500 1800 2300 2900
10 11
3500
2023/6/13 10:21 2023/6/13 10:21