Publicidad
Idiomas disponibles
Idiomas disponibles
EN
INSTRUCTION MANUAL
PRODUCT DESCRIPTION
The electric multi-function 4 in 1 garden machine is designed for
a multiple of outdoor tasks, such as clearing green spaces, trim-
ming garden hedges, cutting branches, etc. It is an ideal product
for all-round garden maintenance.
It comes with a pole saw, a hedge trimmer and a brush cutter
with a thread head and a three-tooth blade.
SAFETY INSTTRUCTIONS
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions listed below may
result in electric shock, fire and/or serious injury.
•
Clear the work area before each use. Remove all objects,
such as rocks, broken glass, nails, wire or string that can
be thrown or become entangled in the power tool parts.
•
Do not operate in poor lighting. Use the unit only in dayli-
ght or good artificial light.
•
Do not operate the power tool in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust.
•
Keep children and bystanders away while operating the
power tool.
•
Do not use the power tool while you are tired or under the
influence of drugs, alcohol or medication.
•
Do not operate the power tool in damp, wet or rainy pla-
ces. Either handle the power tool with wet hands.
•
Prevent unintentional starting.
•
Before using the power tool and after any impact, check
for signs of wear or damage and repair as necessary. Re-
place any damaged parts before use.
•
Do not use the power tool if the switch does not turn on
or off the power tool.
•
Keep the power tool well maintained, fasteners tightened
and worn parts replaced.
•
Keep firm footing and balance when operating the power
tool.
•
Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts.
•
Keep all parts of your body away from moving parts of
the power tool.
•
Use the power tool for the intended purpose only.
•
Never carry the power tool with your finger on the trigger.
•
Make sure all guards straps, and handles are properly
and securely attached when operating the power tool.
•
Maintain a firm grip while operating the power tool.
•
Stay alert, watch what you are doing and use common
sense when operating a power tool.
SPECIFIC SAFETY INSTRUCTIONS FOR BRUSH CUTTER
•
Do not operate the brush cutter unless the blade guard is
firmly secured in place and in good condition.
•
Do not attempt to touch or stop the blade when it is ro-
tating.
•
A coasting blade can cause injury while it continues to
spin after the unit is stopped or trigger released. Maintain
proper control of the tool until the blade has completely
stopped rotating.
•
Replace any blade that has been damaged.
•
Always make sure blade is installed correctly and secure-
ly fastened before each use.
•
For cutting ease, approach the weeds being cut from
the right to the left. In the event an unexpected object
or woody stock is encountered, this could minimize the
blade thrust reaction.
•
Never cut any material over 13 mm diameter.
•
Do not use the brush cutter to cut grass which is not in
contact with the ground; for example, do not cut grass
which is on walls or rocks etc.
•
Always use the shoulder strap when using the brush cut-
ter and adjust to a comfortable operating position.
•
Keep the blade away from body and below waist.
•
Replace the thread head if cracked, chipped or damaged
in any way.
•
Use only the manufacturer's replacement line.
•
Keep the thread head below waist level when operating.
Never cut with the trimmer head over 76 cm or more abo-
ve the ground.
•
Keep hands away from the trimmer head. Do not attempt
to remove cut material or to hold material to be cut when
the trimmer head is moving. Be sure to unplug the power
tool before clearing jammed material.
SPECIFIC SAFETY INSTRUCTIONS FOR POLE SAW
•
Keep all parts of the body away from the saw chain
when the pole saw is operating.
•
When cutting a limb that is under tension be alert for
spring back.
•
Cut wood only. Do not use pole saw for purposes not
intended, such as for cutting plastic, masonry or non-
wood building materials.
•
Before any cutting, you must wait for the saw chain to
reach a stable speed.
•
During cutting, if the saw chain is stuck in the wood,
please stop the saw immediately, and take the saw out
of the wood carefully. Restart till the saw chain reaches
a stable speed, and then start cutting again.
ASSEMBLY OF AN ACCESSORY INTO THE MULTI FUNC-
TION GARDEN MACHINE
1.
Pull the locking lever.
2.
Insert the accessory into the machine. Make sure the
hole of the tube faces the locking lever.
3.
Make sure the locking lever is well inserted inside the
tube.
4.
Make sure both parts of the tool are well attached.
5.
Turn firmly the rotary screw.
FRONTAL HANDLE ASSEMBLY
1.
Put the washer inside the rotating handle.
2.
Put the handle on top of the tool's tube.
3.
Turn the tool upside down and put the other piece of
the handle.
4.
Screw the rotating handle.
BRUSH CUTTER PROTECTIVE COVER ASSEMBLY
1.
Put the tube of the brush cutter inside the protective
cover.
2.
Screw the two bolts.
3.
Put the cover and tighten the three bolts with an hex key.
4.
Insert the frontal part of the protective cover.
· 6 ·
REF. 60040
Publicidad
