Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly (continued)
11
Grounding the gazebo
Slightly lift up the corners of the panels (A and B), and put the corkscrew ground spikes (R) through the hole on the flat bars on the
bottom of the panels (A and B). Twist the corkscrew ground spikes (R) down while the panels are lifted up. Next, twist the corkscrew
ground spike (R) into the ground until the panels (A and B) are secure. Once the corkscrew ground spikes are secured, pound
the ground spikes (FF) through the holes on the flat bars on the bottom of panels (A and B).
NOTE:
You may opt to insert a ground spike (FF) though the
loop in the corkscrew ground spike (R) to assist in twisting the
corkscrew ground spike (R) into the ground.
Care and Cleaning
For the best results, clean the frame and fabric with a damp cloth and dry thoroughly. This will help prevent mildew by removing
dirt particles that may accumulate.
Do not clean with abrasive materials, bleach, or solvents.
Store the gazebo in a dry, sheltered place when not in use.
Keep the gazebo out of fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
A
B
R
FF
15
Please contact 1-855-HD-HAMPTON for further assistance.
R
FF
HAMPTONBAY.COM
Publicidad
