Publicidad
Idiomas disponibles
Idiomas disponibles
If a 13amp plug (BS 1363) is used it must be tted with a 13amp fuse.
If you are in any doubt about the electrical supply to your machine, consult a quali ed electrician before use.
CE Marking certi es that this appliance conforms to the following EEC directives:
Low Voltage Equipment - 73/23/EEC & 93/68 EEC Electromagnetic Compatibility 89/336/EEC, 92/31/EEC &
93/68/EEC
5.3. Physical installation conditions
To ensure smooth operation, as well as reduced energy consumption, it is important that the appliance is installed
correctly.
Ventilation
The compressor and the condenser radiate heat, therefore they require good ventilation. Environments with little
ventilation are not adequate, the appliance should be installed in a compartment with an opening, such as a
window or a door to the exterior, to ensure the air is changed. The environment should not be too humid. Check
that the openings or the grills that ventilate the appliance are not blocked or covered. To ensure smooth operation,
the distances indicated in paragraph 5.4 below must be followed, between its sides and furniture or background
walls.
Away from heat
Do not place the appliance in a location which is directly exposed to sunlight, next to a stove or to any other heat
source.
Room temperature/humidity
The room temperature must be adapted to the climate class of the appliance. Check the climate class on the
characteristics plate and compare it with the following table:
Symbol
Class
SN
Sub Normal
N
Normal
Sub Tropical
ST
Tropical
T
5.4. Appliance Installation Distances
Service Manual
Chest Freezer
Room temperature range
+10 a +32ºC
+16 a +32ºC
+16 a +38ºC
+16 a +43ºC
The appliance cannot be encased. The reference distances in
the image must be respected, thus enabling the adequate
ventilation of the appliance.
It must be installed on a at surface, for a correct levelling of
the appliance, thus avoiding noise and other issues.
5. Conditions for installation and use
EN
11
Publicidad
