Resumen de contenidos para RealRooms Products RH LEVA 3001009
- Página 1 3001009(BLACK) 3001109(WHITE) RH LEVA TALL BOOKCASE Weight Limit 20 lbs / 9.1 KG (each cube) PB 2023/12/4 B34300100900-9480...
- Página 4 TOP & BOTTOM PANEL SIDE PANEL SHELF PANEL 1 SHELF PANEL 2 2 PCS 2 PCS 2 PCS 2 PCS CENTER PANEL 1 CENTER PANEL 2 SHELF PANEL 3 2 PCS 3 PCS 2 PCS PART 3001009 3001109 LABELS (Black) (White) U1016112-A U1016111-A...
- Página 5 HARDWARE LIST 8mm x 25mm 24mm x 5mm 15mm x 12mm 18mm x 6mm 15mm x 5mm WOOD DOWEL MINIFIX SCREW CAP MINIFIX CAP 44PCS 44PCS 44PCS 36PCS 8PCS 15mm x 5mm ANTI TIPPING SET NAIL STUD 1SET 6PCS Hardware Pack Please do not completely tighten all the hardware, until the entire assembly is complete, unless 3001009 (Black)
- Página 6 Insert the dowel (1) on each panel as shown on the left.
- Página 8 Insert cam (3) in each panel and tighten all of it accordingly. Insert screw cap (4) as shown to panel F.
- Página 9 Step 4 Insert cam (3) in each panel and tighten all of it accordingly. Insert screw cap (4) as shown to panel E.
- Página 10 Step 5 Insert cam (3) in each panel and tighten all of it accordingly. Insert screw cap (4) as shown to panel E.
- Página 11 Step 6 Insert cam (3) in each panel and tighten all of it accordingly. Insert screw cap (4) as shown to panel F.
- Página 12 Step 7 Insert cam (3) in each panel and tighten all of it accordingly. Insert screw cap (4) as shown to panel F.
- Página 13 Step 8 Insert cam (3) in each panel and tighten all of it accordingly. Insert screw cap (4) as shown to panel C , D & G.
- Página 14 Step 9 Insert cam (3) in each panel and tighten all of it accordingly. Insert screw cap (4) as shown to panel F , Insert mini x cap (5) to the side panel B.
- Página 15 Step 10 Insert the nail stud (6) on bottom panel A and use a rubber mallet/hammer.
- Página 16 Step 11 Insert the wall bracket (7a) on top panel A. Insert the screw (7b) on the bracket (7a)and do not tighten this screw until step 12.
- Página 17 Step 12 Option 1; Securely screw (7c) into solid area of the wall as shown Option 2 ; Drill a 3/16’’ diameter hole (5mm) in the hole wallboard.Tap the wall anchor(7d) into the hole until it is ush.Fasten the wall bracket(7a) to the wall anchor (7d) with the screw(7c).
- Página 18 Helpful Hints CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury. WARNING : Risk of injury to person Move your new furniture carefully, - do not place a televison on this furniture is not approved with two people lifting and carrying...
- Página 19 3001009(NEGRO) 3001109(BLANCO) LIBRERÍA ALTA RH LEVA Realrooms!
- Página 20 Partes Paquete de componentes IMPORTANTE: La lista de números de piezas que aparece a continuación es 3001009 (Negro) HP # : TU1016112-01 exclusiva de su producto. Por favor, manténgalo a mano cuando solicite piezas de repuesto. HP # : TU1016111-01 3001109 (Blanco) Nota: Por favor apriete completamente los pernos durante el Todo se incluye en 1/1 caja(s) grande(s)!
- Página 21 Consejos utiles • Paso 1 Mueva sus muebles nuevos con cuidado, se requiere de dos Inserte la clavija (1) en cada panel como se muestra a la izquierda. personas para levantar y trasladar su producto a su nueva Paso 2 ubicación.
- Página 22 33001009(NOIR) 33001109(BLANC) BIBLIOTHÈQUE HAUTE RH LEVA Realrooms!
- Página 23 Pièces Quincaillerie IMPORTANT: La liste des références ci-dessous est propre à votre produit. HP # : TU1016112-01 3001009 (Noir) Veuillez l'avoir sous la main lorsque vous appelez pour des pièces de rechange. HP # : TU1016111-01 3001109 (Blanc) Tout dans 1/1 grande(s) boîte(s)! Remarque: Sauf indication contraire dans les instructions, ne pas resserrer complètement les vis et les boulons, jusqu'à...
- Página 24 Instructions Étape 1 Insérez la goupille (1) dans chaque panneau comme indiqué à Conseils utiles gauche. • Déplacez votre nouveau mobilier avec soin, nous recommandons deux Étape 2 personnes pour soulever et transporter le mobilier vers son nouvel Étape 3 Insérez la came (3) dans chaque panneau et serrez le tout en emplacement.