Movement NEXT BACK EXTENSION BENCH Manual De Instrucciones página 42

ASSEMBLING THE EQUIPMENT
CAUTION!
Before starting to assemble your equipment, it is necessary to pay attention to the following precautions:
•Make sure that the packaging is not damaged and that the parts and components of the equipment are
not damaged.
•It is recommended that the equipment be unpacked at the place where it will be assembled.
•The assembly location must be clean.
•The floor must be flat, level, and rigid to avoid equipment instability.
•It is recommended that the equipment be assembled away from humidity and out of sunlight.
ICONS
The icons are meant to instruct good
practices that should be followed
during assembly.
TOOLS
Use the following tools to assemble
the equipment. The function of the
torque table is to guide how much
tightening a particular bolt can
undergo. The table must be followed
strictly.
TABLE FOR THE
SPECIFICATION OF
THE TIGHTENING TORQUE
OF BOLTS FOR ATTACHING
STEEL STRUCTURES
Diameter [mm] Torque [N.m]
M6
M8
M10
For this assembly it is
recommended that
it be done by
two people
Fixed wrench
Wrench
9-12
22-29
45-58
13
50%
Do not tighten
the bolts
all the way
Medium Torque
Threadlocker screwdriver
Allen
Grease
spray
100%
Do not tighten
the bolts
all the way
Philips
Elastic
ring pliers