Forza FIA-WFM2GR Manual Del Usuario página 6

To refresh the device information, pull down the page and then tap any device you want to check up for its real-time status
and related information, as well as to change parameter settings. Please refer to the parameter settings list.
4.4.3 Me
In the Me section, users can modify their information, including user's photo, account security settings, password, clear
cache, and log-out, as shown in the diagrams below.
Note: Under the "Me" section, please select Account Security to access "Account Safe". Here, select the "Bind Mailbox" to
add the email you will link to the account you created. This will allow you to reset the password in the future in case you
forget it.
10
4.5 Device Mode
On the top of screen, there is a dynamic power flow chart to show the inverter's live operation. It contains five icons: PV
power, inverter, load, utility and battery. Based on your inverter model status, there will be Standby mode, Line mode and
Battery mode.
Standby Mode
The inverter will not power the load until the "ON" switch is pressed. Qualified utility or PV source can charge battery in
standby mode.
Line Mode
The inverter will power the load from the utility with or without PV charging. Qualified utility or PV source can charge battery.
Battery Mode
The inverter will power the load from the battery with or without PV charging. Only PV source can charge battery.
11