Publicidad
Idiomas disponibles
Idiomas disponibles
3 Operating
1. Attach the massager to a chair with elastic straps or place it on other support.
2. Connect the adapter cable to the corresponding cable on the cushion.
3. Plug the home adapter into an outlet.
4. Turn on the device using the controller ( instructions on page 3 ).
5. When finished place the controller in the pouch at the side of the cushion.
6. The detachable intensity control flap lets you choose a softer or more intense massage.
7. You also may soften the massage pressure by placing a blanket or towel between you
and the device.
Power Button
Press to turn on the
massager and activate
shiatsu clockwise rotation
at high level, Press again to
activate automatic mode,
press once again to
turn off the massager
Intensity Button
When the massager is
turned on,Press to set
the shiatsu intensity at
high or low level
• This device will switch off automatically after 15 minute timer run out.
• Do not set up or use the massager in a bathroom or similary wet / damp areas.
• Do not use this device while driving.
• For your own safety we equip the massager with a protection against over-heating.
Heat is created in the motors when placed under great stress and excessive pressure. Before
this could create any risk and after a runtime of 15 Minutes. The massager will switch off
automatically and will only allow switching on again after an appropriate downtime.
• Likewise, you should allow your body some rest periods. To avoid straining your muscles too
much, we recommend to not exceed a continuous massage of 15 Minutes.
Direction Button
When the massager is
turned on,Press to shift
Shiatsu clockwise rotation
to Shiatsu anti-clockwise
rotation
Heat Button
When the massger is turned
on. Press to turn on or off
the heat
17
Publicidad
