Publicidad
Idiomas disponibles
Idiomas disponibles
the lock position.
When grinding metal, flying sparks are produced. Take care that
no persons are endangered. Because of the danger of fire, no
combustible materials should be located in the vicinity (spark flight
zone). Do not use dust extraction.
Avoid flying sparks and sanding dust hit your body.
Never reach into the danger area of the machine when it is
running.
Chips and splinters must not be removed while the machine is
running.
Immediately switch off the machine in case of considerable vibrat-
ions or if other malfunctions occur. Check the machine in order to
find out the cause.
Do not let any metal parts enter the airing slots - danger of short
circuit!
WARNING! Danger of burns
The wheel and workpiece will become hot during use. Wear
gloves when changing discs or touching workpiece. Keep hands
away from the grinding area at all times.
Warning!
To reduce the risk of fire, personal injury, and product damage
due to a short circuit, never immerse your tool, battery pack or
charger in fluid or allow a fluid to flow inside them. Corrosive or
conductive fluids, such as seawater, certain industrial chemicals,
and bleach or bleach containing products, etc., Can cause a short
circuit.
Never break open battery packs and chargers and store only in
dry rooms. Keep dry at all times.
Use only System M18 chargers for charging System M18 battery
packs. Do not use battery packs from other systems.
Residual Risk
Even when the product is used as prescribed, it is still impossible
to completely eliminate certain residual risk factors. The following
hazards may arise in use and the operator should pay special
attention to avoid the following:
•
Injury caused by vibration. Hold the product by designated
handles and restrict working time and exposure.
•
Exposure to noise can cause hearing injury. Wear ear
protection and limit exposure.
•
Injury due to flying debris Wear eye protection, heavy long
trousers, gloves and substancial footwear at all times.
•
Inhalation of toxic dusts.
Specified Conditions of Use
The angle grinder is intended for grinding and cutting metal
materials as well as for sanding and 21 brushes (with a wire
brush).
Use the cutting guard from the accessories range for cutting
application.
Please refer to the instructions supplied by the acces-
sory manufacturer.
The machine is suitable only for working without water.
The angle grinder is designed for handheld use; it is not to be
mounted onto a fixture or workbench.
Do not use the product in any way other than those stated for
intended use.
W-Connect
Functionality depends on the region in which the product is sold.
The power tool is Bluetooth® enabled.
The following products are required to use the W-Connect
functions:
•
Mobile device
Android 6.0 and higher
iOS 11 and higher
•
ORSYonline/W-Connect app
•
M-Cube W-Connect battery
•
W-Connect module
•
Power tool which is W-Connect compatible
Refer to the respective user instructions of each individual product.
Inserting the W-Connect Module
See page .10
•
Remove the dummy module from the battery pack.
•
Insert the W-Connect module (WCM-BT) into the battery
pack.
Installing the Mobile App
•
Download the ORSYonline/W-Connect app from your App
Store or Google Play Store.
•
Follow the instructions in the app to complete registration
before using the W-Connect functions of the power tool and
battery pack.
The W-Connect module sends a signal to the ORSYonline/W-Con-
nect app at regular intervals. Depending on the environment, the
signals may be disturbed.
If a connection to the power tool is not possible, check the
following:
•
Module insertion
Make sure that the module is inserted into the battery
correctly.
•
Distance
Reduce the distance between the mobile device and power
tool and try again.
•
Mobile device
Check and make sure that Bluetooth® is enabled on your
mobile device.
W-Connect Functionality
The W-Connect module supports the following functions:
•
Asset management
•
Services
•
Location determination (last known location)
•
Completeness check
LED light on the product
When a protection mode is triggered, the LED light on the product
blinks for 10 seconds. Release the trigger and restart the product.
LED battery indicators
Refer to the following blinking codes of the LED indicators on the
W-Connect battery pack.
Flashing pattern
Frequency
2 times per second
29
Publicidad
