Descargar Imprimir esta página

RSI PPPLSBRC36 Instrucciones De Montaje página 5

Publicidad

Tools and Materials Recommended for Installation:
A Team of Two Persons Will Ease the Assembly & Installation Process
Variable Speed Drill & Drill Bits
Screwdrivers (Phillips & Flat Head)
Level, Tape Measure, Stud Finder
Clear Silicone Caulk/Sealant*
Faucet and Drain Connections
Adjustable Wrench
Hardware to Secure to Wall (Suggest 3/16" x 2 1/2" Lag Bolt)
* Do not use plumber's putty
Step 5: Locate Wall Studs
Determine the exact area on the wall where the cabinet is to be placed.
Locate at least one (1) wall stud within the desired area.
If a wall stud is not present, we recommend toggle bolts or an appropriate wall anchor.
Step 6: Install Vanity
Use the adjustable glides to level the vanity.
Drill ¼" diameter hole in vanity back wall/back rail. Drill 1/8" diameter pilot hole into center of stud.
Note: As you drill holes into wall, use caution to avoid damaging water line/drainage system or electrical wires.
Fasten the vanity to the wall studs through inside of cabinet.
Step 7: Install the Faucet & Drain
Install the faucet, drain and supply lines per manufacturer's instructions (if the faucet requires plumber's putty use clear silicone
caulk/sealant* instead).
Place ring of caulk/sealant around drain flange.
Tighten securely. Avoid over-tightening as it can result in damage to the finish.
Wipe off excess sealant.
*Plumber's putty contains oils that can cause damage to the finish.
Care, Sealing & Maintenance for Vanity Top
The vanity top is made from real stone slabs. Due to its natural beauty, every stone top will have its own unique characteristics such
as veining, color variances and natural surface textures.
It is strongly recommended that a stone penetrating sealer be applied to the vanity top. All natural stone products require resealing as
a routine maintenance procedure. Top must be clean, dry and free of debris before application. Follow sealer manufacturer's
recommendations.
Cleaning Instructions:
Vanity Top & Vitreous China: Use a mild non-abrasive cleaner with a soft cloth.
Vanity: Use a water-dampened cloth. Avoid using any abrasive cleaners.
Hinge Adjustment Instructions:
Vanity Installation Instructions
Up - Down
Haut - Bas
Arriba - Abajo
In - Out
Intérieur – Extérieur
Adentro – Afuera
Left - Right
Gauche - Droite
Izquierda - Derecha
R37544-0410

Publicidad

loading

Este manual también es adecuado para:

Ppplsbrc49